Reed HPC8+, 04609, Guillotine Pipe Cutter - HPC8+, Capacity: 3 - 8 In-nom. DIPS & IPS, PE
| Type | Guillotine Pipe Cutter | Maximum Capacity | 8″ |
| For Use With | Cut PE Pipe | Model No | 4609 |
Product Features
| Remarks | Robust Guillotine Pipe Cutters are designed to cut PE pipe within 1/8 inch (3 mm) of square on medium and high-density pipe. Manual, guillotine style cutter slices straight and clean through polyethylene. REED offers three models to cover from 1-1/2 inch to 12 inch (50-250 mm) pipe diameters. Accurate cuts from REED Guillotine Cutters mean no facing is needed for electrofusion and only minimal facing for butt fusion joints. These tools leave a super smooth, cut surface. Durable, non-stick coated, made-in-USA blade makes many square cuts with no chips to clog valves and small openings. Slight taper on blade allows an easy start to the cut, and holds form for a nice, straight cut. Blades are easy to sharpen or replace.NOTES: Temperature impacts pipe density. Cold temperatures (below freezing) can significantly shorten blade life. Blade is very sharp. Take care when reaching in that area. For operator and blade safety, always transport the cutter with the blade fully seated in the base of the cutter. Use the blade guard if available since it protects the blade and the operator. REED strongly recommends use of the PEGR7 Static Grounding Device (#04621) with Guillotine Cutters. Use a grounding device as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition. HPCs cut PE only and will not cut PVC or PP (polypropylene) pipe, such as Aquatherm. | Country of Origin | United States |
Shipping Info
Package Weight
33.0 lbs
Item successfully added to your cart
Items successfully added to your cart
Added to
Go to My Lists
Select List
Change Quantity?